LAMMPS 塑性 TLSPH 与 ULSPH
用实际完成的 LAMMPS 输入展示参数、提交和结果文件,附各条件的操作记录。
阅读本篇目录
下载输入、Slurm 作业与实际结果。本例使用 LAMMPS 30 Sep 2026 的 P100 构建。附件保存 3 个已完成条件,按输入保留相互作用与操作参数。
选择条件#
解压并进入 lammps-plastic-tlsph-ulsph-operations。CASES 每行对应一个作业数组索引,inputs 保存条件输入,reference 保存实际输出。gpu 条件使用 GPU 构建,其中普通 CPU 样式按输入直接运行;kokkos 条件启用 Kokkos。
| 条件目录 | 主要样式 | 运行模式 |
|---|---|---|
cases-TLSPH-low-failure-threshold |
pair_style smd/tlsph, fix smd/setvel, fix smd/adjust_dt, fix smd/integrate_tlsph, compute smd/tlsph/dt, compute smd/plastic/strain, compute smd/plastic/strain/rate, compute smd/tlsph/stress, compute smd/tlsph/strain/rate, compute smd/tlsph/strain, compute smd/tlsph/num/neighs, compute smd/tlsph/shape, compute smd/damage, dump custom, fix print, compute smd/hourglass/error, compute smd/internal/energy, compute smd/vol, compute smd/tlsph/defgrad |
gpu |
cases-TLSPH-JohnsonCook |
pair_style smd/tlsph, fix smd/setvel, fix smd/adjust_dt, fix smd/integrate_tlsph, compute smd/tlsph/dt, compute smd/plastic/strain, compute smd/plastic/strain/rate, compute smd/tlsph/stress, compute smd/tlsph/strain/rate, compute smd/tlsph/strain, compute smd/tlsph/num/neighs, compute smd/tlsph/shape, compute smd/damage, dump custom, fix print, compute smd/hourglass/error, compute smd/internal/energy, compute smd/vol, compute smd/tlsph/defgrad |
gpu |
cases-ULSPH-funnel-STL |
pair_style hybrid/overlay, fix gravity, fix smd/wall_surface, fix setforce, fix smd/adjust_dt, fix smd/integrate_ulsph, compute smd/rho, compute smd/ulsph/num/neighs, compute smd/contact/radius, compute smd/triangle/vertices, dump custom, compute smd/internal/energy, compute reduce, fix balance, compute smd/ulsph/effm, compute smd/ulsph/strain/rate, compute smd/ulsph/stress |
gpu |
输入与提交#
第一组的输入如下。单位、边界条件和参数以对应 in.lammps 为准。
####################################################################################################
#
# TLSPH example: elongate a 2d strip of aluminum py pulling its ends apart
#
# unit system: GPa / mm / ms
#
####################################################################################################
####################################################################################################
# MATERIAL PARAMETERS
####################################################################################################
variable E equal 70.0 # Young's modulus
variable nu equal 0.3 # Poisson ratio
variable rho equal 1 # initial mass density
variable q1 equal 0.56 # standard artificial viscosity linear coefficient
variable q2 equal 0.0 # standard artificial viscosity quadratic coefficient
variable hg equal 10.0 # hourglass control coefficient
variable cp equal 1.0 # heat capacity of material -- not used here
variable JC_A equal 0.3241 # Johnson Cook parameters
variable JC_B equal 0.1138
variable JC_N equal 0.42
variable JC_C equal 0 #0.002
variable JC_M equal 1.34
variable JC_epsdot0 equal 1.0e-3 # 1/s = 1/(1000 ms)
variable Troom equal 298.15
variable Tmelt equal 500.15
variable eosC0 equal 0.0 # Polynomial EOS parameters
variable eosC1 equal 74.2
variable eosC2 equal 60.5
variable eosC3 equal 36.5
variable eosC4 equal 1.96
variable eosC5 equal 0.0
variable eosC6 equal 0.0
####################################################################################################
# INITIALIZE LAMMPS
####################################################################################################
dimension 2
units si
boundary sm sm p # simulation box boundaries
atom_style smd
atom_modify map array
comm_modify vel yes
neigh_modify every 10 delay 0 check yes # re-build neighbor list every 10 steps
newton off
####################################################################################################
# CREATE INITIAL GEOMETRY
####################################################################################################
variable l0 equal 1.0 # lattice spacing for creating particles
lattice sq ${l0}
region box block -10 10 -10 10 -0.1 0.1 units box
create_box 1 box
# 完整输入见附件
在附件根目录提交第一组或所选条件。
sbatch --array=0 run.slurm
# 按 CASES 的完整列表提交
sbatch run.slurm
脚本申请一个 MPI 任务、一个 CPU 核和一张 P100,根据 MODES 加载对应模块。实际调用保存在 cases.json,例如第一组的命令参数为:
lmp -k off -pk omp 1 -echo both -in in.lammps > native.out
查看输出#
结果写入 work-new/条件名。先查看日志中的实际热力学表与结束信息。
cd work-new/cases-TLSPH-low-failure-threshold
tail -n 35 native.out
本次第一组的原生日志片段如下。
Loop time of 16.6002 on 2 procs for 20000 steps with 400 atoms
Total wall time: 0:00:16
原始输入若包含 dump、数据表或其他导出命令,相应文件会保存在该条件目录。附件提供的参考数据文件为 final.dump, stress_strain.dat。按自己的体系修改输入时,保留对应势函数文件、单位和原子样式设置。
再次运行前,将已有的同名 work-new 条件目录改名保存。
本次输出示例#
第一组原生热力学输出的开头如下,列名由该组输入的 thermo_style 设置。
Step Dt f_dtfix Time v_strain
0 9.9999999999999998e-17 0.0000000000000000e+00 0.0000000000000000e+00 0.0000000000000000e+00
100 2.0705725808837137e-02 2.0498925443343330e+00 2.0705725808837139e+00 4.4364430336834836e-05
200 1.8983850004375333e-02 4.0324033495877885e+00 3.7967700008750667e+00 1.6515222922096559e-04
需要根据你的体系选择资源?联系讨论计算需求。实际可用软件与权限,以当前账户和运行环境为准。